Beijing york instrument
Phymetrix Moisture Measurement Innovation at Work
Add to Cart
Built-in Temperature And Pressure Sensors ,Portable Dew Point Meter , NIST Traceable Calibration
Advantages
The ability of the sensor to attract large amount of water molecules when the moisture content is very low (e.g. parts per billion), creates a sensor capable of very reproducible fast responding measurements at dewpoints as low as 110°Cdp. The response time is further enhanced in the PhyMetrix portable instruments by the desiccant sensor storage mechanism. The ability of our Analyzer to have a built-in temperature and pressure sensors to perform compensations provides a calibrated consistent measurement. The NIST traceable calibration performed on each instrument at the PhyMetrix Calibration Laboratory provides an accurate measurement. The advanced humanfactors engineered software and ergonomic housing allows easy use.
· Reproducible over a wide measurement range -110°Cdp to +20°Cdp
· Fast response
· Temperature compensated
· NIST traceable calibration
· Easy to use software
· Ergonomic & convenient housing
Technical Specifications
| Performance | Operating Conditions | ||
| Measurement Ranges | -110℃ -+20℃ DP -60℃-+20℃ DP | Operating Humidity | Less than 95%(Non-Condensing) |
| Resolution | 0.1℃ DP | Operating Temp | -20℃ to +60 ℃ |
| Response Time | 95% of step change in 5 mins | Inlet Gas Pressure | 150psig |
| Repeatability | +/-0.5℃ DP | Flow Rate | >1 LPM |
| Electrial Specifications | Mechanical Specifications | ||
| Display | 2.5”LCD,320*240 Screen Resolution | Protection | Intnsically Safe,Class 1,Div 1 Group B,C,D |
| Battery | Li-ion rechargeable,8 hours on full charge | Dimensions | Height:5.51” Width:5.04” Depth:8.42” |
| Input Charge Voltage | 115/230VAC | Weight | 2.6KG |
